Grenadier Wizzards and Warriors W34b Medusa

The saying goes, “make hay whilst the sun shines”. In my case, it is “varnish figures whilst the sun shines”. After finishing the Asgard Land Dragon, the next figure to be extracted from the Lead Mountain was… this. 

My heart sank. Whilst I am a big fan of Grenadier sculpts in general, the figures from the Wizzards and Warriors range were pretty awful – coarse, low in detail, and probably designed more as toy figures than as miniatures for gamers. This one fits into that category. Alackaday. Still, we must do what we can…

The first thing was to try and get it in a reasonable condition to paint. That meant trimming and filing of flash from the figure, and then filling in small dents and gaps. After that, the paint job… starting from the top; the hair. There was little or no detail to suggest that these were snakes… it just looks like a bad hair day. I’ve attempted to paint each snake with bands, so it suggests something venomous like a coral snake; however, there is so little detail that the end product just looks like a Rastafarian Medusa. Not too happy with that! 

Medusa’s are supposed to be able to turn their victims to stone; with that in mind, I tried to echo that by painting the upper body grey, like stone – my reasoning was that if the Medusa kept taking glances at her body, the very least that should happen would be for it to take on a grey-ish tinge. I was quite pleased with this; I think it inadvertently channels Indian scriptures of Kali! The facial features are very coarse – barely etched into the face – and I’ve done what I can with it. Not sure what the harness it is wearing is supposed to be either, but I’m assumed it is gold jewellery and painted it accordingly.

The lower snake part gave a bit more joy; the sculptor had traced out banding (not with any consistency), so I was able to pick that out with GW putrid flesh for the underbelly, and green and yellow for the scales. The base is simply GW sand. After that… a wash with GW shades, and the highlighting. Lots of lots of highlighting, effectively repainting the figure again!

The end product has a certain naïve charm I suppose, but I’m not enthused. Having said that, it is more likely to see table top time than the Asgard Land Dragon!

Asgard Fantasy Monsters FM64 Land Dragon and Lizardman

I haven’t posted for a while, but that doesn’t mean I haven’t been painting – it is just that we’ve had so much rain recently, I simply haven’t had an opportunity to varnish the figures I’ve completed, and I preferred to wait for a couple of dry days rather than suffer the dreaded vanish frosting due to moisture in the air.

Anyhow… next to be extracted from the Lead Mountain was this rather splendid beastie from Asgard. The Land Dragon does seem to share a common ancestry with the Asgard Wyvern which I did earlier this year, but that is no bad thing.

The model came in 3 parts – rider, the main body of the Land Dragon, and the tail. The joint for joining the tail to the body was really poor, and it took quite a bit of superglue plus Milliput to get it in place. As with the Wyvern, the original Asgard catalogue drawing showed the tail hanging down, whilst in reality it is obvious from the casting the tail is supposed to curve upwards. It certainly makes for a more dramatic (if more fragile) figure! Originally the rider just sat on top of the Land Dragon, and there were huge gaps in the casting – this was alleviated by adding a leather cushion (sculpted from Milliput) for the rider to sit on. He certainly looked a lot comfier after the addition of the cushion!

And so on to painting. Quite a simple job, really; yellow for the underbelly of the Land Dragon, then red for the main body of it and the rider, with brown for the rider’s furs, followed by GW red shades to bring out the depth, and then highlighting. The base is just flock with a few garden twigs added.

I was quite pleased with the way this turned out – it’s a well detailed sculpt, especially for Asgard, who did turn out a lot of very coarse models, especially on the larger ones – and it is a very dramatic figure too. Having said that… there are definite issues with it, and I wonder why Asgard actually produced it. The rider is very small, especially when compared to other Lizardman figures from the Asgard FM range, although I suppose you could argue that the Lizard man race selected small riders for the same reason we select small jockeys to ride horses! If it were used as an encounter for a standard DnD session, I suppose the Land Dragon could give the party a hard time, but this figure strikes me as being more suitable for war gaming, with a unit of them charging the enemy ranks. Whilst this is a good idea in principle, I am guessing that the sheer cost of assembling a unit of Land Dragons and rider (plus the low popularity of Lizardman armies amongst gamers I know) meant that this just didn’t happen. Bit of a shame, as it is nice figure – just a bit too specialised for regular use.

Grenadier Fantasy Lords Second Series 030 Giant Ogre Champion

Next to be extracted from the Lead Mountain was this beastie from Grenadier. Initially I thought it was a Troll variant, similar to this chappie, and so he was painted accordingly with pale/grey skin. It took a bit of research on Lost Minis to find him, which is when he was ID’d as an Ogre!

The paint job was comparatively simple – grey for the skin, dry brushed with white, and then the main armour was GW Tin Bitz dry brushed with gold. The other colours are simply base colours – leather, green, yellows – with a wash of Army Painter Soft Tone. The base is just flock with a twig from the garden placed at the front.

Many of the early Grenadier figures can look slightly cartoonish – very much in keeping with the illustrations from the AD&D 1^st Edition Monster Manual  – and so I was quite pleased with the way this one painted up, as it still manages to look vaguely unpleasant and threatening. It also seems to be a comparatively rare figure; I’ve only seen it a couple of times on certain auction sites. Pleased with the way this one turned out!

Little Horrors: Alternative Armies Zombie, Grenadier Mummy, Citadel Aerial Servant

It’s been a while since I last posted; a combination of work and decorating has effectively kept me again from the lead mountain. Still, I’ve managed to put in some work on a couple of minor nuggets:

The zombie is from the Alternative Armies Very Nasty Things: The Risen Dead range. I like Alternative Army sculpts; they are the nearest I’ve seen in style to the old Citadel sculpts, with just the right mix of genuine unpleasantness edged with comedy. Just look at the skull exposed under the rotting skin! It was a pleasure to paint as well – GW putrid flesh, standard colours for the clothing, then Army Painter wash and highlighting. Simples!

In the centre, a John Dennett sculpt from the Grenadier 1506 Monster Manuscript Vol.VIMM53 range. To be honest, I’m not fan of the figure; whilst it is well done, the Grenadier figures from this period always seemed a bit fragile and just a bit too small… maybe it is a Halfling Mummy! Again, simple to paint up – white for the bandages, leather for the exposed skin, and a sand colour for the pillar, followed by the usual Army Painter wash and highlights. The end product is OK, but I can’t see it getting much table time.

And finally, on the right – the Aerial Servant from the Citadel Weird Fantasy range. This was actually a damaged figure from a job lot – the base had been snapped off and was missing. The stone slabs on the base are made from Milliput, and serve as an anchor for the figure – it is still top heavy, so under the base are some lead weights from a fishing bag to hold it down. The figure itself was very simple to paint – dark gray, then lots and lots of drybrushing with white, with the red cloth done afterwards. It’s a bit of coarse, but it also has a lot of charm and humour sadly missing from a lot of today’s figures.

Quite pleased with the way these turned out!

Asgard Fantasy Monsters FM68 Necromorph

And staying with the theme of Undead... the next exhibit for the Menagerie is this unpleasant looking fellow – a Necromorph, or as everyone refers to him… a Lich. Goodness knows why Asgard didn’t call it a Lich and have done with it – Lich is a perfectly good old English word, so I can’t imagine it would have been an issue with copyright – perhaps someone just liked the word NECROMORPH. It didn’t catch on though. 

The figure was simple to paint; GW Rotting Flesh for the skin, then suitably sombre colours for the clothing, then a wash of Army Painters Dark Tone and then dry brushing.  The base is just model railway gravel, whilst the ‘mist’ around the base is simply strands of cotton wool.

I think this is a splendid figure for its time – it would definitely have a place as the default Undead Sorcerer in many D&D scenarios – but to be honest, as with so many of the Asgard figures, it does look very coarse compared to many of today’s sculpts. In all likelihood it will be degraded from the status of Undead Sorcerer to Undead minion leader. Correction: Undead NECROMORPH minion leader:)

Grenadier Fantasy Lords 2nd Series 025 Lord of Death

No two ways about it; Grenadier chose some weird subjects to sculpt in the 1980’s. Next out of the lead mountain was this chappie, complete with cowl, cloak and scythe (but sadly missing a cocktail stick stuck through small pieces of cheese and pineapple). The paint job was fairly easy – white primer, then a couple of washes of Army Painter dark tone, then lots of white dry brushing to bring up the white again. The cowl and cloak were then painted black, and then dry brushed with several shades of gray to bring it up, followed by various ‘touch up’ jobs in white and black to tidy the entire figure up. I'm not entirely sure what the strange thing around its waist is - a pouch for putting gathered souls in, or a sporran maybe? The base is simply model railway gravel given a dark tone wash, and then dry brushed red and orange to try and suggest that it is stalking around on warm coals.

It’s a big sculpt – the second picture shows a Grenadier Fantasy Warriors (FW) barbarian against it to give you can idea of the scale, and the FW range were big hefty sculpts themselves! – and I actually quite like it as a sculpt. It has a definite sinister air, and not something you’d want a group of adventurers to encounter at the end of a session. Imagine your Cleric trying to turn THAT!

The question I have about this figure is WHY Grenadier produced it - who it was aimed at? It is such a specialised figure that I really can’t see it getting much table time at all. I mean, how many D&D sessions need a giant skeleton with a scythe? It might potentially get some play as the centre piece of an Undead army I suppose, but even then I can’t imagine Grenadier ever shifting many copies of the figure. As a wild guess… was this figure ever marketed for the Heavy Metal and Goth market…? I should imagine it would find a few takers there. As it is, it’s a comparatively rare figure (although as with many Grenadier figures, it’s not of great value on certain auction sites).  

Asgard Fantasy Monsters FM58 Wyvern attacking

A wyvern is a legendary winged creature with a dragon's head, which may be said to breathe fire or possess a venomous bite, a reptilian body, two legs (sometimes none), and a barbed tail. 

Next up from the lead mountain was this early release from Asgard. Now, I'm not a fan of winged creatures in metal - there is usually an overhead in securing the wings to the body, followed by the liberal use of Milliput to fill in any gaps, and even when the wings are on there is always the risk that a tabletop accident will cause them to break off. Plus they attract dust like there is no tomorrow. Still, onwards and upwards…

The sculpt came in four pieces – the body, two wings, and the tail. The actual sculpting is pretty good – lots of fine detail, not too many flash lines to remove – and the securing pins/slots for the wings were surprisingly well moulded, with only a minimum of Milliput needed around the joint for the tail. Interestingly, the original catalogue line drawing from Asgard shows the figure with the tail down – but it is fairly obvious from the sculpt that the tail is supposed to curve upwards, a bit like a scorpion’s tail. Once assembled it became apparent that the sculpt was very unstable, hence the need for two 40x40mm bases glued together to support it.

The paint job was comparatively easy – light yellow for the belly and underside of the neck, then green for the main body, head, wings and tail, with just a splash of red for the barb at the end of the tail. Washes and dry brushing then brought up the fine detail of the scales and on the wings. The base is simply flock plus some stones and twigs from the garden - my reasoning is that the Wyvern is most likely to be encountered in the wilderness, rather than in a dungeon!

I’m quite pleased with the way it turned out – not bad for a figure that’s nearly 30 years old! I suspect it is a fairly rare piece, as it’s the only one I’ve ever seen in the wild, although I understand that Viking Forge still produce the model. I’m guessing it was never that popular due to the cost of it in the early 70’s – it is a fair sized lump of metal – and also I suspect it would get limited table time, as opposed to something like a dragon which would be brought out again and again. Shame really, because I think it’s a lovely piece of early sculpting.